How To Make Furs A Ready-to-wear Clothing (Two)

Last time we showed three steps, do you still curious about the rest? Yes? We are continuing to introduce the following five procedures. Hopefully, it will offer you some help for further understanding of fur clothing!

 

Last time we showed three steps, do you still curious about the rest? Yes? We are continuing to introduce the following five procedures. Hopefully, it will offer you some help for further understanding of fur clothing!

 

4.Cutting furs according to the paper pattern.

 

Cutting pelts according to the paper pattern is also called Shangyang. Firstly, lay the garment pieces on the operating table, draw lines on the pieces according to the paper pattern and make some marks on them, such as the waist closing area. Then stick the tape on the inner side of the line drawing part of the garment (for clothing cutting easily). Start trimming according to the line, and trim all the edges of the garment piece neatly; then cut the waist part according to the drawn marks. Then this part is done.

 

5.Using the machine to stitch the finished garment pieces.

 

Using the machine to stitch the finished garment pieces is also called Cheke. In short, the sleeves are sewn on the coat first, then the pockets, etc. The last is the sewing of the waist part.

 

6.Making the inner lining.

 

First, we draw lines on the lining according to the paper pattern, then cut the lining following the draw lines; after cutting, using the sewing machine to sew the lining together.

 

7.Handsewn.

 

The first step is to nail the buttons. First, sew a soft interlining on the edge of the front of the coat; next, use a pen to mark the position of the button, use scissors to cut a hole at the mark, insert the button, and pin it. Secure the buckle with a needle and thread. Sewing lining requires that the stitches are symmetrical and fine, and cannot be exposed. For the sake of beauty, lacework can be sewn on the edge of the cloth in the clothes.

 

8.Final inspection.

 

 

Firstly, it requires workers to check whether the sleeves of the clothes are the same length and whether the woolen surface is flat or not. Besides, the shoulders are required to be accurate, and the seams are straight. 

 

Secondly, check the lining of the mink garment, which requires the hanging surface to be straight and flat, and should not be too long.

 

In addition, carefully check the hand-tailored part, the needle distance is required to be uniform and neat, and there should be no excessive thread ends, holes, etc.

 

Finally, check whether there is hair loss and shedding. If there is a problem in the inspection, mark it and modify it in time.

 

So that’s all, thank you for reading. If you need help in your search for bulk custom fur clothing purchases, our team is eager to assist. Whether you want to place your order or need assistance in locating a specific style or color, we are here to help.

 

We will share more professional and interesting knowledge or news in the following days. Please keep following Emay! What shall we share next time? Stay tuned!