Temperature: -200～800（℃）
Standard: APi 6a
Delivery: In Stock
Pressure: High Pressure
High Light: ASME B16.20 RTJ ring joint gasket, HB170 RTJ ring gasket, HB170 RX ring gasket
The Ring Type Joint Gasket is initially developed for high pressure/ temperature applications found in the petroleum industry and is primarily used in the oilfield on drilling and completion equipment.
However, today this product range can also be found on valves and pipe work assemblies, along with some high integrity pressure vessel joints.
Gasket type Ring joint gasket standard Flange standard Oval ASME B 16.20 API 6A ANSI B 16.5 ASME B16.47, SERIES A Octagonal ASME B 16.20 API 6A ANSI B 16.5 ASME B16.47, SERIES A RX ASME B 16.20 API 6A API 6 B BX API 6A API 6 B
Primary features:
1. Resistance to high temperature and pressure, suitable for high pressure flange
2. Excellent temperature resistance. Permanent temperature range -200℃to +550℃
3. Very high operating pressure limits (320 bar)
4. Good chemical resistance
5. High-grade, reinforced and blow out safe gasket as per UW (Healty and safety at Work Act), high operating safe
6. Very low leakage rate, meets TA-LUFT requirement
7. No ageing, no embitterment, even at high temperature
8. Asbestos-free, physiologically harmless, disposal with domestic waste
9. Good handling during transport, installation and removal. Mechanically stable, scratch-resistant
Related products:
ASME B16.20 Ring Joint Gaskets, API 6A Ring Joint Gaskets, API 17D Ring Joint Gaskets, Non-standard Ring Joint Gaskets
We can offer more than 30 kinds of materials, such as 321SS, 347SS, 316SS, 304SS, Inconel 625, Monel 400, INCOLY 825, Nickel 200, Duplex F44, soft iron, low carbon steel and so on. We have over 10 years experience in export business. Our products are sold to Southeast Asia, Middle East, Europe and America and well appreciated by our clients.
Oval cross-section Industry Ring Joint Gaskets and Octagonal cross section Ring Joint Gaskets are used in pressures up to 10,000 psi
The hardness of the ring gasket should always be 30% lesser than the hardness of the flanges to prevent flange deformation
Dimensions and Tolerances for Ring Joint Gaskets and Grooves are covered in API 6A and ASME B16.20.
We stock a wide range of sizes and materials ready for immediate shipment from Ring Numbers R11 to R105.
Ring type joint gaskets(RTJs) are designed for high pressure applications. They are available in a variety of forms to suit different flange formats . RTJs can be used for very high and/or fluctuating pressures (up to 1500 bar), depending on the profile selected. Material selection determines use for high temperatures (up to i000°C) and in aggressive media. To ensure proper sealing the surfaces of contact between the gaskets and flange have to be carefully processed. The small sealing area and high contact pressure results in excellent sealability.
As a result of metal to metal sealing media they are made to be free of indentations, tool marks etc and have a surface finish of maximum.
· R, RX – 63 microinches Ra (1.6 micrometer Ra).
Thus Gasket supplies ring joint gaskets (RTJ Gasket) with the hardness numbers as follows:
GASKET MATERIALS
BRINELL HARDNESS NUMBER (max)
ROCKWELL HARDNESS NUMBER (max)
IDENTIFICATION
Soft iron 90 56 D Low carbon steel 120 68 S 4-6% Chrome 1/2% molybdenum 130 72 F5 304 Stainless Steel 160 83 S304 316 Stainless Steel 160 83 S316 347 Stainless Steel 160 83 S347Material Identification Material No. Hardness Temperature (oC) Min Max. Soft Iron D – 90 -40 500 Low Carbon Steel S – 120 -40 500 Stainless Steel 304 304SS 1.4301 160 -250 550 Stainless Steel 304L 304L SS 1.4306 160 -250 550 Stainless Steel 316 316SS 1.4401 160 -100 550 Stainless Steel 316L 316L SS 1.4404 160 -100 550 Stainless Steel 321 321SS 1.4541 160 -250 550 Stainless Steel 347 347SS 1.445 160 -250 500 Stainless Steel 410 410SS 1.4 170 -20 850 Aluminum Al 3.0255 30 -250 300 Copper Cu 2.009 ca.80 -250 400 Brass CuZn37 2.0321 ca.60 -100 350 Nickel 200 Ni200 2.4066 110 -250 600 Monel 400 400 2.436 150 -125 600 Inconel 600 600 2.4816 150 -100 950 Hastelloy B2 B2 2.4617 230 -200 450 Titanium Ti 3.7025 ca.215 -250 350
Marking and Identification (standard):
The outer surface of each Ring Type Joint should show the manufacturer’s name or a trademark, the gasket number like R67, RX37 or BX155, gasket’s material in abbreviation(check below our chart), as well as the standards like ASME B16.20, API 6A, API 17D, etc.
Materials
RTJ gaskets are available as standard in soft metal and in 304, 316 and stainless steels. Versions in other materials on request.
All RTJ gaskets are manufactured to API standards, guaranteeing consistent quality.
Industries
Under axial compressive load, ring type joints plastically deform and flow into the irregularities of the flange groove. Since the contact area of the ring type joint is relatively small, a very high compressive load results between the sealing surface of the ring type joint and the flange groove. This surface pressure is further increased especially by the RX and BX RTJ variants. Both variants are able to seal extremely high internal pressures. RTJ gaskets are produced from metal, so they remain in their compressed form, even when the surface pressure is relaxed. The sealing function of the RTJ gasket is reinforced by the axial forces acting on the sealing surfaces.