Say goodbye to timely and costly internal inspection methods. Zenith performs fully automated inspections, allowing you to spend more time where it matters. Let Zenith do the inspecting for you and enter the new age of inspection technology.
Automated inspection devices like Zenith are becoming the foundation of sustainable and repeatable inspections. This next evolution of the robotics industry will focus on features like “going back” to defects and calculating their rate of growth over time. Look at how these features have already been incorporated to Zenith by clicking on the links below.
30x Optical Zoom with 4K video recording and 18MP still photos comes standard on our primary payload. Capture & measure a defect down to 1/32″ in size, all clearly shown by our 10,000 Lumen LED that is brighter than car headlights.
Our high-capacity lithium ion batteries are built to last through the entire inspection. Zenith Batteries operate for hours of system runtime and most inspections can be done in less than 1hr.
Compare the growth rate of defects with extreme accuracy and better refine your maintenance and repair budgets. Each inspection software is included with both products, whether you rent or buy.
Zenith and Legacy One are both designed with the inspector in mind. Zenith contains many safety features and ergonomic design that provides the inspector with the best experience from start to finish.
Reach 500+ feet of vertical space with Zenith
Download for full specs and features
360° Viewing thanks to
specialized gimbal & CoaxDrive
Only 1 Inspector required thanks
to all-in-one controller operation
Zenith boasts many customer friendly advantages over competing UAVs.
With no complex in-person training needed, the Zenith is operable by anybody,
no certification required. It is fully capable to be used as a one-man job for inspections.
Zenith boasts many customer friendly advantages over competing UAVs. With no complex in-person training needed, the Zenith is operable by anybody, no certification required. It is fully capable to be used as a one-man job for inspections.
The weight of Zenith is fully supported by the cable coming off the Tripod, allowing for much longer battery run time. Inspections can be fully completed without the need to continually swap out batteries.
Thanks to Zenith’s extension arms and modular Winch, the system should never require the operator to break the plane for confined space entry.
Zenith’s bottom shell is adaptable to attach a variety of secondary payloads such as Survey Grade Lidar, Thermal and Radiation sensors, etc.
The winch acts as a signal repeater allowing the operator to be up to ′ away from the Tripod while operating the Zenith.
Zenith carries a sophisticated IMU and Hall Effect sensor for accurate height and heading information, giving you real-time inspection data throughout the entire operation.
NEW WING Drone Winch supply professional and honest service.
Zenith uses the same wireless technology from the Legacy One enabling it to hang from a razor-thin cable, rather than a traditional bulky tether to operate the system.
Read more below about how Zenith’s multiple configurations
are solving real-world inspection challenges.
The Zenith Controller was designed with the inspector in mind. We built many key features into this part of
the Zenith’s system to ensure a safe and smooth inspection, with no prior training or certifications necessary
to operate. The controller is designed with low profile buttons and sliders for use while wearing work gloves.
Smaller drones require small “cell ” sized cameras to save weight. With far less weight restrictions for Zenith, it has the ability to carry a wide variety of payloads, starting with the advanced camera
inside the gimbal’s protective housing.
Smaller drones require small “cell ” sized cameras to save weight. With far less weight restrictions for Zenith, it has the ability to carry a wide variety of payloads, starting with the advanced camera inside the gimbal’s protective housing.
Bring the smallest defects into
full frame real time
Capture still photos with the
push of a button
Finding defects is one thing, but measuring their size and tracking their growth is another.
Capture a full asset with the
highest resolution video
Light up the darkest spaces with a light brighter than car headlights
The operator can pan the gimbal 180° straight up, to straight down, while rotating Zenith
Learn more about Zenith and see if it’s the right tool for the job. Discover why Zenith may be a better fit for inspecting rather than a drone.
Purchasing the Zenith provides you 24/7 access to our technology. If this is your best path, join us for a virtual demonstration. We will answer all your technology questions and highlight all of Zenith’s features and advantages.
Click to get started.
Only need to use the Zenith for a single inspection or you want to test Zenith before purchasing? We have partnered with global distributors to provide Zenith Rentals within the United States, Europe and Australia. Click to explore our rental options.
Not quite ready to purchase? With Interactive Aerial’s Inspection Services, two confined space trained operators will bring the latest technology to your site. Hire us for just the first inspection or sign a continual service agreement for every outage! Click to get started.
Ready to get started? Have a question? We’re here to help! Simply fill out the contact form and one of our professional team members will get back to you within 24-hours -OR- give us a call to speak with an expert right now!
Are you interested in learning more about Aerial Winch System? Contact us today to secure an expert consultation!