Oil seal is also known as shaft seal. They are often called grease, fluid or dirt seals. Oil seal is an integral part in any rotating and moving part assembly. They close spaces between stationary and moving components in mechanical equipment. In most applications, the seal is either partially or temporarily immersed or is simply exposed to splashing lubricant, particularly in engines, transmissions, gearboxes or axles. They are vital components of almost every type of machine and vehicle in operation. An oil seal normally consists of three basic components: The Sealing Element (the nitrile rubber part), the Metal Case, and the Spring. It is a widely used sealing component. The function of a seal is to prevent the leakage of medium along the moving parts. This is mainly achieved by the sealing element.
Oil Seal Cross Reference
TC-Type
The TC profile is a shaft seal composed of a single metal cage with a rubber coating, a primary sealing lip with integrated spring and an additional anti-pollution sealing lip.Two different O.D. designs are available: Flat rubber sheath as well as wavy. The additional dust lip protects the main sealing lip against dust and other fine solid contaminants and therefore this type is recommended for use in polluted environments. To achieve a long lifetime a suitable lubricant between the two sealing lips should be applied.
htob supply professional and honest service.
Installation Instructions
To provide effective sealing, radial shaft seals must be installed properly. An experienced installer with suitable tools, working in a clean environment, is recommended to provide proper installation. To facilitate seal installation and to achieve initial lubrication, prior to installation, NextGen Tech recommends wiping the shaft and seal with the lubricant that is going to be retained. While the outside diameter of metal-cased seals can be lightly lubricated to ease installation, the outside diameter of rubber covered seals should always be lubricated.
Seals with an auxiliary, contacting lip can also be filled with grease between the sealing lip and auxiliary lip to reduce frictional moment. This does not apply to silicone rubber seals and seals with hydrodynamic features.
If you want to learn more, please visit our website TC Skeleton NBR Rubber Oil Seal.
Production Process
Sealing Mechanism of Oil Seal
FAQ
For more information, please visit Rubber Oil Seal.
1.Our price:
Our price is not the lowest one, but compared with the same quality level product,ours is the best one.
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.What can you buy from us?
Kind: Oil Seals,O-ring, Rod/Piston seal, Gas seal, Guide elements, Large sized Seals Customized Seals.
Material: NBR/EPDM/FKM/Silicone/HNBR/PU
4. Shipping:
Quickly delivery, with several delivery ways, such as DHL/FEDEX/UPS/TNT express, Air and Ocean shipping way. We have several express accounts and can help you save cost.
5, About customized Service:
Drawings or samples, it is enough. We can produce colored rubber seal just based on your drawing or samples with kinds of colors. We also can give the professional advice based on your requirement.